DS 52 set. Dew point measurement for desiccant or absorption dryers.
DS 52 set. Dew point measurement for desiccant or absorption dryers.
- Ideal for all types of adsorption dryers with a measuring range of -80…+20°Ctd.
- Gas-independent measurement, also suitable for other, non-corrosive gases
- Compact design, ideal for dryer installations
- Robust design, protection class IP 66
- Condensation insensitive sensor element
- Long-term stability and drift-resistant, thus optimized calibration intervals
- Fast adaptation time, especially from dry to wet conditions
- BSP, NPT or UNF threads
- Analog output 4…20 mA (2- or 3-wire technology) and Modbus RTU (RS 485) interface
- Measured values available in different units, pressure dew point [°Ctd], temperature [°C], rel. humidity [%rh], abs. humidity [g/m³], degree of humidity [g/kg], humidity fraction V/V [ppmV/V], water vapor partial pressure [hPa], atmospheric dew point [°Ctd.atm].
- On-site sensor diagnostics with handheld device or CS Service Softwar
Description
DS 52 set. Dew point measurement for desiccant or absorption dryers.
The measuring range of -80...20°Ctd makes the dew point set DS 52 with alarm the ideal dew point monitor with analogue output 4...20 mA. The dew point sensor FA 510 is extremely long-term stable and can be installed and removed quickly and easily under pressure by means of the screwable measuring chamber including quick coupling. The dew point set is supplied ready for plug-in, i.e. everything is completely wired. The alarm values can be freely adjustedFeatures
- System ready for plug-in: Everything completely wired
- No time-consuming studying of the instruction manual
- 2 alarm contacts (230 VAC, 3 A) pre- and main alarm freely adjustable
- 4...20 mA analogue output
- Option alarm unit: Buzzer and continuous red light